Propoxy 20 is a fast acting, co-extruded single stick, epoxy putty. Made of a pre-measured, steel reinforced dark gray/black epoxy resin with a contrasting strip of hardener embedded in the center. The two part epoxy compound mixes quickly and easily to form a permanent steel-hard bond in 20 min. Adheres to almost any surface with strength often greater than the materials it has joined. After curing, it can be drilled, filed, sanded, painted and machined. Can be applied to damp or wet surfaces and even makes underwater repairs. Propoxy 20 is non-conductive and may be used for electrical insulating repairs and can be used on applications where it is subject to temperatures up to 300 deg F for extended periods of time. Do not expose to open flame.

• Kneads quickly and easily
• Seals, mends, bonds and repairs almost anything
• Density 15.8 lb/gal
• Modulus of elasticity (6) 105 psi
• Izod Impact 0.3 ft-lb/in
• Hardness (shore D) 85
• Maximum use temperature 300 deg F
• Dielectric strength 400 V/mil at 1/8 in
• Volume resistivity (5) 1015 Ohm-cm

Standards/Certifications: NSF/ANSI 61 certified

Applications: For potable water applications

• Catalog https://www.plumbers-supply-co.com//ASSETS/DOCUMENTS/ITEMS/EN/UNI-PS16923_Cat.pdf
• MSDS https://www.plumbers-supply-co.com//ASSETS/DOCUMENTS/ITEMS/EN/UNI-PS16948_MSDS.pdf
• Specification Sheet https://www.plumbers-supply-co.com//ASSETS/DOCUMENTS/ITEMS/EN/UNI-PS16948_Spec.pdf