Sioux Chief 652-A
Send Print
  1. pin-int

Sioux Chief 652-A

HydraRester 650 Copper Water Hammer Arrester, 1/2 in, MIP, 6-1/2 in L

  • Manufacturers: Sioux Chief Manufacturing
  • Brand Name: Sioux Chief
  • PN: SC652-A
  • MPN: 652-A
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading
  • 89 4.4 Branch Availability
Connection Size      :      1/2 in
Connection Type      :      MIP
Item Name      :      Water Hammer Arrester
Length      :      6-1/2 in
Material      :      Copper
Pressure Rating      :      350 psig
Series      :      650
Sub Brand      :      HydraRester
Temperature Rating      :      250 deg F
Width      :      1-3/8 in

Sioux Chief 650 series piston-type water hammer arresters shall be required in piping systems. Water hammer arresters shall have sufficient volume of air to dissipate the calculated kinetic energy generated in the piping system. Arresters shall be effective when installed at any angle. Arresters shall be approved for installation with no access panel required. Water hammer arresters shall be ANSI/ASSE 1010 2004 certified. Arresters shall be sized and placed per manufacturer's instructions.

  • Lifetime cycle tested at US Testing Laboratories to withstand 10000 shock cycles, factory tested to withstand 500000 cycles without failure (654-C tested)
  • HydraRester male sweat fittings are compatible with press-fitting systems, such as Viega ProPress and all push-fitting systems
  • Allows for installation in 2 x 4 wall cavity
  • Installs at any angle
  • ASSE 1010 certified as a water hammer arrester that is designed to provide continuous protection, without maintenance allowing the HydraRester to be installed without access panels
  • 1 to 11 fixture unit capacity

Standards/Certifications: ANSI/ASSE 1010-2004

  • pdf Catalog https://www.plumbers-supply-co.com//ASSETS/DOCUMENTS/ITEMS/EN/UNI-PS26298_Cat.pdf
  • pdf Specification Sheet https://www.plumbers-supply-co.com//ASSETS/DOCUMENTS/ITEMS/EN/UNI-PS26298_Spec.pdf