AVK 45-200-MMN
Send Print
  1. pin-int

AVK 45-200-MMN

45 Fusion Bonded Epoxy Coated Ductile Iron Open Right Non-Rising Stem Gate Valve, 8 in, Mechanical Joint, Lead-Free

  • Manufacturers: American AVK
  • Brand Name: AVK
  • PN: 45-200-0119634129
  • MPN: 45-200-MMN
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading
  • 89 4.4 Branch Availability
Connection Size      :      8 in
Connection Type      :      Mechanical Joint
Dimension      :      11-1/2 in L
Finish      :      Fusion Bonded Epoxy Coated
Item Name      :      Gate Valve
Material Specifications      :      ASTM A536, ASTM D2000, ASTM A582
Material      :      Ductile Iron
Pressure Rating      :      250 psi
Series      :      45
Stem Material      :      Stainless Steel
Type      :      Non-Rising Stem, Open Right
  • Lead-free
  • Threads rolled in a separate cold pressing process to enhance strength
  • Rolled threads ensure smooth thread edges and low operating torques
  • Twice the yield strength required by AWWA eliminates bent and broken stems
  • Stainless steel bolts
  • Packing gland bolts and bonnet bolts are stainless steel for corrosion-resistance
  • Bonnet bolts are countersunk and capped with hot melt to totally isolate the bolts from corrosive environments
  • O-ring bonnet gasket wraps each bolt to prevent corrosion
  • Bonnet blow-offs due to bolt corrosion eliminated
  • Ductile iron wedge fully encapsulated in EPDM rubber with an integral bronze stem nut for optimum corrosion protection and precision wedge tracking
  • EPDM resists attack from chloramines
  • Ductile iron gland flange for protection should the valve be over torqued in the closed direction - will not break or crack
  • Gland flange equipped with cast in lifting lugs for easy handling
  • Wiper ring - to prevent impurities from entering the stem and to protect the O-rings
  • (2) O-ring stem seals to reduce friction and prevent wear and tear - replaceable under full pressure
  • Third O-ring stem seal protects upper stem from impurities entering from the water-way
  • Coating to AWWA C550 - electrostatically applied fusion bonded epoxy coating inside and outside for excellent corrosion-resistance
  • Ductile iron wrench nut, bronze wedge nut, thrust collar, Buna-N nitrile rubber bonnet gasket, wiper ring, O-ring stem seals and O-ring gland seal
  • All AVK gate valves are covered by a 10-years warranty
  • Made in USA

Standards/Certifications: cULus listed, FM approved, AWWA C509/C515, AWWA C550, NSF/ANSI 61 and 372 certified

Applications: For water and neutral liquids to maximum 160 deg F

  • pdf Installation Sheet https://www.plumbers-supply-co.com//ASSETS/DOCUMENTS/ITEMS/EN/UNI-PS7581_Instal.pdf
  • pdf Specification Sheet https://www.plumbers-supply-co.com//ASSETS/DOCUMENTS/ITEMS/EN/UNI-PS7581_Spec.pdf