Your ultimate solution for eliminating leaks, evolving higher pressure and more demanding hydraulic systems expose the metal to metal flare fitting which makes it very difficult to obtain a permanent leak free flared fitting joint. Flared fitting Leaks are most commonly caused by misalignment, surface damage and vibration in the field. The entire seal is coated with a dry to the touch, baked-on Loctite sealant. When inserted into a 45 deg SAE fitting, the concentric rings form multiple seals down the face of the flare, while the Loctite coating fills minor imperfections, dramatically increasing the integrity of the fitting. New ISO and NFPA standards strongly recommend seals for all fittings. The result is the Flaretite seal is a permanent, leak-free connection, which exceeds the performance of todays ORFS fittings and at significantly lower cost. Our seal maintains the low profile, versatility and world wide availability of flared fittings. Flared connections fitted with Flaretite seals are todays answer to low cost, high integrity, zero-leak fittings, while complying with new international standards. This unique seal may be fitted to 45 deg SAE, refrigeration and gas fittings. The introduction of the Flaretite seal eliminates the weakness in the original flare design.

• 45 deg copper stamping with loctite coating
• Locking tabs clip seal securely on fitting
• Conical rings for multiple points of contact

Standards/Certifications: California Proposition 65

Applications: For refrigeration and gas application

• Specification Sheet https://www.plumbers-supply-co.com//ASSETS/DOCUMENTS/ITEMS/EN/UNI-PS31020_Spec.pdf